Description
Model: GATE REMOVER SET
SKU: R-GRS
Made in Korea
Set Includes
-
RASER ORIGIN
-
BALANCER
-
RECOVER
-
STORAGE CASE
The three high quality tools enclosed minimize the multiple steps for gate-mark removing process and bring a perfect surface to completion.
PERFECT SOLUTION FOR REMOVING GATE-MARKS
Step 1: Removing Gate-marks
Use the RASER to remove gate-marks.
Surface turns glossier than the original surface after the gate-mark is removed.
Step 2: Balancing Gloss Level
Use the BALANCER WHITE's green side to turn the glossy surface (step 1) to a matte surface. This is the preliminary step before balancing the level of glossiness.
Step 3: Recovering Gloss Level
Use the RECOVER to the matte surface (step 2) to restore the gloss level of the original plastic parts. This completes the Gate-marks removal process with a perfect finish.
** Each product's unique function can be used in various combinations depending on different user levels and methods. Please refer to each product description page for more detail.
PRODUCT SPECS & FEATURES
Model: RASER ORIGIN
Size: 90x11x3mm
Material: Tempered Glass
Technology: Super-Nano
SKU: R-GR-RE1
Made in Korea
-
The name RASER is derived from combining the two words GATE + ERASER. It's a new concept of sanding tools that leaves no scratches when removing gate-marks.
-
Super-Nano Technology is applied to RASER v1.5 for improved abrasive performance.
** Applied since May 2020
With 400 grit force, RASER v1.5 can easily remove thick gate-marks to produce a clean surface without any scratches. Evolutionary super-nano technology provides a strong 400 grit force incomparable to any other similar products.
Super-Nano Technology
With 400 grit force, RASER ORIGIN can easily remove thick gate-marks to produce a clean surface without any scratches. Evolutionary super-nano technology provides a strong 400 grit force incomparable to any other similar products.
Handcrafted Smooth Edge
Handcrafted smooth edges leave no scratches on the plastic surfaces and it goes through a strict QA process to ensure the safe use by users of all ages.
Using on Clear Parts
When removing the gate-mark on the clear parts, it's sufficient enough to use only the RASER alone.
Model: BALANCER WHITE
Size : 18*90*15mm
Material: Advanced Sanding Sponge
Technology: Ultra-Fine
Made in Korea
-
BALANCER is used after the gate-mark is removed with the RASER to balance the gloss level of the surface.
-
Depending on the user's methods, it can be used to process matte, semi-gloss or gloss surfaces.
Green side is used for pre-processing the surface before making a glossy surface.
After using the green side, a super glossy surface can be acquired using the white side.
Model: RECOVER
Size : 90*90mm x 2
Material: Functional fabric
Technology: Twill Weave
-
RECOVER is a finish touch-up polisher to restore the original gloss level of plastic parts.
-
It polishes the rough surface from sanding and adds a bit of extra shiny look on the surface.
-
First, use the BALANCER's green side then use the RECOVER to retrieve the plastic's original semi-gloss surface. This step is crucial to have a perfect finish when removing the gate-marks and it's highly recommended for users who don't paint nor use top-coat after building.
-
Packaging case is designed as a reusable storage case for longer lasting care of valuable tools.
-
Big enough size is easy and convenient to store several GUNPRIMER's tools and much more. (Make sure to remove the foam insert before using it as a storage case)
IMPORTANT
-
Residues stuck on the RASER, BALANCER and RECOVER's surface can decrease performance. To remove residues, clean with water or masking tape. If cleaning with water, dry completely before using.
-
Tempered-glass made RASER does not break during normal use. However, it can be damaged from external shocks and drops. Always store in a storage case when not in use.
-
Only use on plastics. Do not use on the metals.
-
Do not wet the storage case as it's made of hard paper.
